Before designing the 36v battery box, we had 4 products: 3s12v, 6s24v, 7s29, 13s48v. But a lot of buyers wanted a higher voltage, so we designed this 36V case.

The biggest difference of this product is no welding. It does not need any solder when it is assembled and used. It can be directly exported and used with the battery.

The battery box is composed of 10 batteries in series, which are respectively on the two sides of the circuit board, so as to reduce the volume.
Protection board We have prepared two kinds for everyone, one is 25 and the other is 50.

There is a 15A fuse on each board, and if there is a problem with one battery, it will not affect other batteries.

Product parameters

Size: 130*90*20mm

Capacity:3AH

Direction for use

Upon receipt, the battery can be installed directly. The orientation and polarity of the battery installation shall be subject to the symbol on the circuit board. After the battery is installed, the slot is in the same direction, and the copper column is screwed on.

Recently, we found that our battery box product has been inquired by many customers, who are not very understanding of the use of this battery box. Here we add a new instruction of using tips.
The upper and lower layers are superimposed to increase the capacity without changing the voltage.

When installing batteries, the positive and negative orientations of the batteries must be the same, and the positive orientations of all batteries must be on the same side.